New LED Chip 3014 for tubes application,
LED chipmaker Epistar has plans to completely take over subsidiary Huga Optotech through a share swap.
Taiwan’s largest chip maker, Epistar, has announced it will completely take over subsidiary Huga Optotech through a share swap in which one Epistar share will be exchanged for 4.85 Huga shares. The merger will take effect on December 28, 2012.
In July of 2010, Epistar took a 47.88% stake in Huga Optotech. The new deal will expand Epistar’s registered capital to NT9.1 billion (USD303.3 million) from NT8.6 billion currently. Epistar currently holds a 50.85% share in Huga.
Huga has a production capacity of 150,000 units of 2-in equivalent epitaxial wafers a month, and the company is currently running at 70% of its capacity. Meanwhile, Epistar has a capacity of 330,000-340,000 epitaxial wafers per month.
After the merger, Huga’s production lines will focus on the production of low-power LED chips, while those of Epistar’s will be responsible for high-power LED chips.
Synergistic effects of the merger are likely to take place in the second quarter of 2013, said Epistar.
|LED lighting played a major role in the London 2012 Olympics, particularly in the celebrations surrounding the Opening and Closing ceremonies.|
|Many of the events at the Olympic Games in London benefitted from the use of LED lighting, which was selected in some cases for its longevity and sustainability, and in others for its color-changing capabilities and wow factor.
The latter was the case in both the Opening and Closing Ceremony, when LEDs were used to create patterns, text and animated effects in the crowd sections. More than 70,000 LED modules, each containing 9 LEDs, were positioned next to the spectator seats (see photo). The modules were supplied by Belgium-based.
As discussed in a recent article inIllumination in Focus magazine, the lighting scheme for the 2.5-km2 (246-hectare) Olympic Park had a huge focus on legacy aspects. The area will be converted to a public park after the Games, and temporary lighting posts will be removed, leaving permanent LED-based outdoor lighting.
GE was keen to emphasize its role as a key supplier for the London 2012 Games, including lighting for some of the most recognizable fixtures and venues.
Perhaps most prominently, GE partnered with EDF, the Mayor of London, and the City of London Corporation, to refit London’s iconic Tower Bridge with an energy-efficient LED lighting system. London will enjoy benefits from the deal long after the Games, as the new lighting system is expected to be in place for 25 years.
GE Lighting said that it has supplied 14,000 lamps for London’s 80,000-seat Olympic Stadium, as well as supplying Odyssey luminaires and ceramic metal halide (CMH) Streetwise lamps to ensure the highest levels of security within the main visitor areas in the Olympic Parks.
Also within the main Park, GE Lighting supplied 25,000 Tetra PowerMAX LED modules and Tetra LED drivers for night-time orientation lighting.
At the 15,000-capacity Olympic Hockey Centre, GE supplied specialist sports floodlights in the form of its Euroflood 2000, which has been designed with an integrated ballast compartment for high-pressure sodium (HPS) and metal halide (MH) lamps up to 600W.
Because of GE’s role as a major global Olympic sponsor, its competitors are not permitted to discuss directly their role in providing lighting for the Olympic venues. However, it’s clear that Philips supplied the lion’s share of the lighting at the Olympic Park, including the iconic masts powered by vertical wind turbines, and also the LED-based lighting for pedestrian thoroughfares.
Philips also supplied lighting schemes that enabled TV broadcasting from the main venues, including the Olympic stadium, the Aquatic Centre and the Velodrome. Lessons learned from these installations are summarized in a document by Philips on the Olympics Learning Legacy website (search “lighting” athttp://learninglegacy.london2012.com).
Despite a commitment to maximize the use of sustainable technologies, the London 2012 organizers were not able to specify LED lighting for many of the key tasks, including the main lighting schemes for the Olympic Stadium and other major venues. We’ll see whether LEDs have an even bigger impact at the games in Rio de Janeiro in 2016.
Quality for a brighter future BML quality control staff work alongside our trusted production partners to ensure our high standards are reached at each stage of the manufacturing process. Before going into mass production, any new product is tested for several months to ensure its stability and reliability (mechanics, thermal management and optics). BML has imposed strict SOPs at each step of the manufacturing process, from the incoming materials to the finished goods. After rolling off the production line, each one of our LED lights goes through an aging test for 24-48 hours. With a fully equipped lighting performance laboratory (integrated sphere, ageing room), deeper tests are then achieved on production batch samples to check our products conformity with our clients requirements. Our LED lights are then ready to be delivered to customers around the world. Only the best BML selects only the best chips and drivers for our products. All components’ suppliers are going through a series of test at the R&D department to make sure end users will have light for a long time. We carefully pick the most reliable chip brands such as CREE, Nichia, Epistar and Bridgelux; taking into account the applications requirements and cost control.
Only the best We carefully pick the most reliable LED chip brands such as CREE, Nichia, Epistar and Bridgelux ; taking into account the applications requirements and cost control, morevover we also are very focus concerning the encapsulation process.
We offer to our customers consistent operating characteristics that’s why our LED lighting product are guaranteed between 3 and 5 years.